⏱ 2 min read

10 mistakes that make gel lift (and how to avoid them)

Lifting, bubbles, wrinkles, chipping, runny color: the most common causes of a failed gel manicure and their fixes.

10 mistakes that make gel lift (and how to avoid them)
Contents
  1. Rushed prep
  2. Touching the nail after dehydrating
  3. Gel on the skin
  4. Coats that are too thick
  5. Curing time too short
  6. Forgetting to cap the free edge
  7. Shaking the bottle
  8. Gel running to the sides
  9. Mixing brands
  10. Neglecting aftercare
  11. Diagnosis table

Your gel lifts after three days, wrinkles under the lamp or chips at the tip? In the vast majority of cases the cause is one of the ten mistakes below. Good news: they're all easy to fix.

1Rushed prep

Cuticle left on the nail, surface still shiny, traces of oil: this is the number-one cause of lifting. Take the time to push back cuticles, buff and dehydrate (the full guide).

2Touching the nail after dehydrating

Simply touching it with a finger leaves skin oil behind. Once the nail is dehydrated, hands off.

3Gel on the skin

Gel that spills onto the cuticle or sides forms a bridge between skin and nail. As it grows, the skin lifts the gel. Clean up any overflow with a clean brush before curing.

4Coats that are too thick

A thick coat cures poorly underneath: it wrinkles, stays soft and heats up under the lamp. Two thin coats always beat one thick one.

5Curing time too short

Each gel has its curing time. A weak lamp or a badly placed thumb leaves the gel soft (the lamp guide).

6Forgetting to cap the free edge

If the brush doesn't run along the edge of the nail, color and top wear at the tip and chip. Cap with every color coat and with the top.

7Shaking the bottle

Shaking a gel bottle creates bubbles that then appear on the nail. Roll it gently between your hands instead (except for magnetic and glitter gels, which you stir to resuspend the particles).

8Gel running to the sides

An overloaded or runny gel slides into the side grooves. Work one finger at a time and cure quickly, or even “flash cure” for 10 seconds before moving to the next nail.

9Mixing brands

Base, color and top from the same range are designed to bond together. Mixing brands can work, but it's a common cause of layers separating.

10Neglecting aftercare

Gel doesn't like household products or long soaks in very hot water. Wear gloves for the dishes and moisturize cuticles with oil every evening: a dry cuticle cracks and takes the gel with it.

Diagnosis table

Symptom Likely causes
Lifting at the base 1, 2, 3
Wrinkles, soft gel underneath 4, 5
Chipping at the tip 6, 10
Bubbles 7
Thick edges, gel in the sides 8
Layers separating 5, 9

To practice without wasting product, put your manicure together in the 3D studio: the layer order and each product's tips appear at every step.

10 mistakes that make gel lift (and how to avoid them)

Try it in the 3D studio

← All guides